小睿私人云Zidoo X9s固件20220413同步官方更新ota包、免拆线刷包

阿文菌

请问能不能帮忙看看我这台设备刷机失败是什么原因呢？
我这台设备之前安装过群晖小睿的固件，现在好几个固件都刷不上，代码如下：


Realtek> usb start
(Re)start USB...
rtk_usb_clock_init:43: Realtek-usb: Enable 1296 u3host clock and power
USB0:   USB XHCI 1.10
scanning bus 0 for devices... Unknown request , typeReq = 0x200c
1 USB Device(s) found
USB1:   USB XHCI 1.10
scanning bus 1 for devices... Unknown request , typeReq = 0x200c
1 USB Device(s) found
USB2:   USB EHCI 1.00
scanning bus 2 for devices... 1 USB Device(s) found
USB3:   USB XHCI 1.10
scanning bus 3 for devices... Unknown request , typeReq = 0x200c
xHC internal address is: 1
XHCI expected == TRB_TRANSFER
2 USB Device(s) found
scan end
       scanning usb for storage devices...  address 5
inquiry returns 0
1 Storage Device(s) found

1: Hub, USB Revision 3.0
- u-boot XHCI Host Controller
- Class: Hub
- PacketSize: 9  Configurations: 1
- Vendor: 0x0000  Product 0x0000 Version 1.0
   Configuration: 1
   - Interfaces: 1 Self Powered 0mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 1
     - Class Hub
     - Endpoint 1 In Interrupt Interval 255ms

2: Hub, USB Revision 3.0
- u-boot XHCI Host Controller
- Class: Hub
- PacketSize: 9  Configurations: 1
- Vendor: 0x0000  Product 0x0000 Version 1.0
   Configuration: 1
   - Interfaces: 1 Self Powered 0mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 1
     - Class Hub
     - Endpoint 1 In Interrupt Interval 255ms

3: Hub, USB Revision 2.0
- u-boot EHCI Host Controller
- Class: Hub
- PacketSize: 64  Configurations: 1
- Vendor: 0x0000  Product 0x0000 Version 1.0
   Configuration: 1
   - Interfaces: 1 Self Powered 0mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 1
     - Class Hub
     - Endpoint 1 In Interrupt Interval 255ms

4: Hub, USB Revision 3.0
- u-boot XHCI Host Controller
- Class: Hub
- PacketSize: 9  Configurations: 1
- Vendor: 0x0000  Product 0x0000 Version 1.0
   Configuration: 1
   - Interfaces: 1 Self Powered 0mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 1
     - Class Hub
     - Endpoint 1 In Interrupt Interval 255ms

5: Mass Storage, USB Revision 2.0
- SanDisk Cruzer Fit 4C530006071220109475
- Class: (from Interface) Mass Storage
- PacketSize: 64  Configurations: 1
- Vendor: 0x0781  Product 0x5571 Version 1.39
   Configuration: 1
   - Interfaces: 1 Bus Powered 200mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 2
     - Class Mass Storage, Transp. SCSI, Bulk only
     - Endpoint 1 In Bulk
     - Endpoint 2 Out Bulk

Realtek>


-------------------

Realtek> fatload usb 0:1 0x01b00000 bluecore.audio

** Unable to use usb 0:1 for fatload **
Realtek> fatload usb 0:1 0x03000000 emmc.uImage

** Unable to use usb 0:1 for fatload **
Realtek> fatload usb 0:1 0x02100000 rescue.emmc.dtb

** Unable to use usb 0:1 for fatload **
Realtek> fatload usb 0:1 0x02200000 rescue.root.emmc.cpio.gz_pad.img

** Unable to use usb 0:1 for fatload **
Realtek> boot all
Booting ACPU...
Booting Kernel...
fdt_loadaddr : 0x02100000
fdt_prepare, FDT header error!!
Realtek>


-------------------

麻烦大佬看看~~~

tywg001

好东西,当然要支持

阿文菌

很牛！过下刷机看看。

adams_wang

bill 发表于 2020-3-8 13:21
和之前的z1000固件有什么不同么？

USB3.0 可用，TF卡槽可用，开关键可用

adams_wang

stonecold 发表于 2020-3-8 13:11
刷了群晖的能刷吗

可以的可以的可以的

bill

和之前的z1000固件有什么不同么？

乡巴佬

感谢大佬！！

无敌兔

牛逼了，我的神

stonecold

刷了群晖的能刷吗